After filling the material, how to choose the capping machine or sealing machine?

After filling the material, how to choose the capping machine or sealing machine?

In order to make the capping machine better match the filling machine and the machinery of the production line, we can choose different capping machines according to the requirements of bottles and caps, as well as output and other requirements.

There are different ways of capping machines, including capping machines, capping machines, capping machines, etc., which are used to tighten and loosen the caps of plastic bottles and glass bottles (molded bottles or tube bottles) after they are packaged. device of. The capping machine is generally used for different liquids, pastes, and powder injection glass bottles and plastic bottles (molded bottles or vials) to be divided into aluminum caps or aluminum-plastic caps, crimping and sealing equipment.

The fully automatic machine is more and more popular among customers. It can also automatically arrange the cap to the bottle mouth before the capping machine. It can be conveyed to the sub-cap bin or the vibrating plate to arrange the cap by the lifting belt. Supply caps to the capping head, and adjust the torque to realize the capping torque adjustment function, so that the capping is just right.

According to the needs, for some bottle types, the capping machine will also add aluminum foil sealing equipment, as well as the function of removing bottles without aluminum foil, that is, the rejection device.

1* The whole machine of capping machine adopts PLC control;

The main motor is a variable frequency stepless speed regulation motor;

The outer frame of the fuselage is made of stainless steel 304 material and meets GMP requirements.

2* Upper cover part

The upper cover part adopts a stepped lifting belt, the bottle cap feeding speed is fast, and the noise is small;

The structure of the drop cover is exquisite, and there is no reverse cover slipping off;

The upper cover adopts the method of frequency conversion speed regulation.

3* Capping part

The rotary head is used for capping, and the capping torque is adjusted by torque adjustment. The capping pass rate is high and the noise is low.

4* Rejection device

Automatic detection and rejection of unqualified products with poor screw caps, no aluminum foil, and no caps.

5* When a sudden power failure occurs, the rejection reaches the rejection position. (optional)

For more capping machines, please refer to http://www.fillingsealingmachine.com